Products
SPORTS SURFACING SYSTEMS (outdoors)
SPORTS SURFACING POLYURETHANE BINDERS
One component dilute impregnating and priming agent of low viscosity. Ambient moisture curing
Properties:
- reinforces and enhances the bonding with the substrate
- makes rigid and bound crumbled to dust and grinded to sand surfaces
- improves the bonding strength (cohesion) and resistance to chemicals and mechanic factors
Application:
TETRAPUR 25 is used as an impregnating and priming agent on concrete
substrates with the high resistance requirements (abrasion, cohesion, chemicals).
In order to obtain the best results it is advised to use TETRAPUR 25 at the
temperature range from 7°C to 30°C.
| Technical data: | |
|---|---|
| Density (at 20°C) | ~0,90 g/cm³ |
| Viscosity (at 23°C) | 20 ± 5 mPas |
| Pack size | 180 kg |
One component dilute impregnating and priming agent of low viscosity. Ambient moisture curing.
Properties:
- reinforces and enhances the bonding with the substrate
- makes rigid and bound crumbled to dust and grinded to sand surfaces
- improves the bonding strength (cohesion) and resistance to chemicals and mechanic
factors
Application:
TETRAPUR 25A is used as an impregnating and priming agent on the asphalt
substrates with the high resistance requirements (abrasion, cohesion, chemicals).
In order to obtain the best results it is advised to use TETRAPUR 25A at the
temperature range from 7°C to 30°C.
| Technical data: | |
|---|---|
| Density (at 20°C) | ~0,90 g/cm³ |
| Viscosity (at 23°C) | 20 ± 5 mPas |
| Pack size | 180 kg |
One component, coloured, solvent containing, structured spray bonding agent, ambient moisture curing.
Properties:
- high mechanical resistance
- low viscosity
- high flexibility
Application:
TETRAPUR 134 is used for the fabrication of coloured spray coated surfaces of polyurethane
on SBR or EPDM rubber granules mats, when applying permanently elastic, water permeable
synthetic coatings in sports surfaces, ie athletic tracks or playgrounds and the like. installed
mechanically „in situ”. It is used as a raw material for making elastic wearing layers in sports
surfaces such as TETRAPUR ENZ variety II creating the robust and elastic sports lining. In
order to obtain the best results it is advised to use TETRAPUR 134 at the temperature range
from 7°C to 30°C.
| Technical data: | |
|---|---|
| Density (at 23°C) | ~1,07 g/cm³ |
| Viscosity (at 23°C) | 2 000 ± 500 mPas |
| NCO content | 5,5 ± 0,5 % |
| Pack size | 220 kg |
2 component, coloured, solvent containing, structured spray bonding agent.
Properties:
- high mechanical resistance
- low viscosity
- high flexibility
- water permeable
Application:
TETRAPUR 135 is used for the fabrication of coloured spray coated surfaces on polyurethane
rubber granules mats when applying permanently elastic, water permeable synthetic coatings in
sports facilities, ie athletic tracks or playgrounds and the like. installed mechanically „in situ”.
It is used as a raw material for making elastic wearing layers in sports surfaces such as
TETRAPUR ENZ variety II creating the robust and elastic sports lining. In order to obtain the
best results it is advised to use TETRAPUR 135 at the temperature range from 6°C to 30°C.
| Technical data: | ||
|---|---|---|
| Density (at 23°C) | Comp. A Comp. B Mix A + B | ~1,17 g/cm³ ~1,08 g/cm³ ~1,09 g/cm³ |
| Viscosity (at 23°C) | Comp. A Comp. B Mix A + B | 700 ± 100 mPas 2 500 ± 500 mPas 1 500 ± 500 mPas |
| Pack size | Comp. A Comp. B | 200 kg 220 kg |
High quality, ambient moisture curing, solvent free, onecomponent
PUR binder based on MDI/TDI mix.
Properties:
- high mechanical resistance
- low viscosity
- high flexibility
- solvent free
- wide range of adhesion
Application:
TETRAPUR 144 is used as a one-component binder for placing elastic layers from
rubber crumbs (SBR or EPDM) installed mechanically „in situ”. The typical fields
of application are athletic tracks, safe playground surfaces, multipurpose fields and
tennis courts. It is used as a raw material for making elastic rubber mats in sports
surfaces such as TETRAPUR ENZ varietyIV, IV/S and TETRAPUR PZ. In order to
obtain the best results it is advised to use TETRAPUR 144 at the temperature range
from 7°C to 30°C.
| Technical data: | |
|---|---|
| Density (at 23°C) | ~1,08 g/cm³ |
| Viscosity (23°C) | 2 500 ± 500 mPas |
| NCO content | 10 ± 0,5% |
| Pack size | 220 kg |
High quality, ambient moisture curing, one-component PUR binder based on MDI.
Properties:
- high mechanical resistance
- low viscosity
- high flexibility
- fast curing
- wide range of adhesion
Application:
TETRAPUR 154 is used as a one-component binder for placing elastic layers from rubber crumbs (SBR or EPDM) installed mechanically „in situ”. The typical fields of application are athletic tracks, safe playground surfaces, multipurpose fields and tennis courts. It is used as a raw material for making elastic rubber mats in sports surfaces such as TETRAPUR ENZ variety II, IIIS, IV, IV/S and TETRAPUR PZ. Depending on the kind of sport surface the mats made from the rubber crumbs mixed with TETRAPUR 154 are, by the end of the process, sealed, sprayed or covered with a coat creating the robust and elastic sports lining. In order to obtain the best results it is advised to use TETRAPUR 154 at the temperature range from 7°C to 30°C.
| WŁAŚCIOWŚCI | |
|---|---|
| Density (at 20°C) | ~1,08 g/cm³ |
| Viscosity (at 23°C) | 3 000 ± 500 mPas |
| NCO content | 10 ± 0,5% |
| Pack size | 220 kg |
High quality, solvent-free ambient moisture curing, onecomponent PUR binder based on aliphatic isocyanines.
Properties:
- high mechanical resistance
- high UV resistance
- high flexibility
- solvent free
- wide range of adhesion
Application:
TETRAPUR 166 is used as a one-component binder for placing elastic layers from
EPDM rubber crumbs installed mechanically „in situ”. The typical fields of application are athletic tracks, safe playground surfaces, multipurpose fields. In order to obtain the best results it is advised to use TETRAPUR 166 at the temperature range from 7°C to 30°C.
| WŁAŚCIOWŚCI | |
|---|---|
| Density (at 23°C) | ~1,08 g/cm³ |
| Viscosity (at 23°C) | 2 500 ± 500 mPas |
| NCO content | 8,5 ± 0,5% |
| Pack size | 215 kg |
Two component coloured bonding PUR thixotropic solvent free filler.
Properties:
- does not contain solvents
- bonds without shrinkage or bursting
Application:
TETRAPUR 110 is used as a two-component thixotropic filler sealing the pores in
the mats made of SBR granules installed mechanically „in situ”. Used in the sports
surfaces such as TETRAPUR ENZ variety II N, III/S and TETRAPUR ENW.
In order to obtain the best results it is advised to use TETRAPUR 110 at the
temperature range from 7°C to 30°C.
| Technical data: | ||
|---|---|---|
| Density (at 23°C) | Comp. A Comp. B Mix A + B | ~1,25 g/cm³ ~1,23 g/cm³ ~1,24 g/cm³ |
| Viscosity (at 23°C) | Comp. A Comp. B Mix A+B | thixotropic 300 ± 50 mPas thixotropic |
| Pack size | Comp. A Comp. B | 24 kg 6 kg |
Two component, poured, solvent free, coloured, self levelling, elastic PUR system.
Properties:
- high mechanical resistance
- low viscosity
- high flexibility
Application:
TETRAPUR 136 is used as a two-component surfacing layer for placing elastic
coverings poured with rubber crumbs EPDM, installed mechanically „in situ”
creating the robust and elastic sports lining. It is used as a raw material for layers in
sports surfaces such as TETRAPUR ENZ variety III, IIIS, IIIM. In order to obtain
the best results it is advised to use TETRAPUR 136 at the temperature range from
10°C to 30°C.
| Technical data: | ||
|---|---|---|
| Density (at 23°C) | Comp. A Comp. B Mix A + B | ~1,45 g/cm³ ~1,08 g/cm³ ~1,25 g/cm³ |
| Viscosity (at 23°C) | Comp. A Comp. B Mix A + B | 44 500 ± 500 mPas 3 500 ± 500 mPas 3 500 ± 500 mPas |
| Pack size | Comp. A Comp. B | 200 kg 220 kg |
Two component, poured, solvent free, coloured, self levelling, elastic PUR system.
Properties:
- high mechanical resistance
- low viscosity
- high flexibility
Application:
TETRAPUR 137 is used as a two-component interlayer for placing elastic
background poured mechanically „in situ”. It is used as a material for layers in
sports surfaces such as TETRAPUR ENZ variety III and IIIM. In order to obtain the
best results it is advised to use TETRAPUR 137 at the temperature range from 10°C
to 30°C.
| Technical data: | ||
|---|---|---|
| Density (at 23°C) | Comp. A Comp. B Mix A + B | ~0,60 g/cm³ ~1,08 g/cm³ ~0,85 g/cm³ |
| Viscosity (at 23°C) | Comp. A Comp. B Mix A + B | 15 500± 500 mPas 3 500 ± 500 mPas, 8 500 ± 500 mPas |
| Pack size | Comp. A Comp. B | 16 kg 220 kg |
Two component, solvent containing, wheathering resistant polyurethane lacquer.
Properties:
- mat
- UV and weather resistant
- highly flexible
- abrasion resistant
Application:
TETRAPUR 90 is two component, pigmented, mat, UV and weathering resistant polyurethane lacquer. In order to achieve the best results we recommend usage of TETRAPUR 90 between 10°C and 25°C.
| Technical data: | ||
|---|---|---|
| Density (at 20°C) | Comp. A Comp. B | ~1,21 g/cm³ ~1,06 g/cm³ |
| Pack size | Comp. A Comp. B | 4,25 kg 0,75 kg |
Two component, solvent containing, wheathering resistant line painting.
Properties:
- mat
- UV and weather resistant
- highly flexible
- abrasion resistant
Application:
TETRAPUR 91 is two component, pigmented, mat, UV and weather resistant, line painting. In order to achieve the best results we recommend usage of TETRAPUR 91 between 10°C and 25°C.
| Technical data: | ||
|---|---|---|
| Density (at 23°C) | Comp. A Comp. B | ~1,21 g/cm³ ~1,06 g/cm³ |
| Pack size | Comp. A Comp. B | 0,85 kg 0,15 kg |
FOAMS FOR WARMING AND INSULATION
TETRAFOAM 510/E is a two-component polyurethane system for producing open-cell semi-rigid foam. The resulting foam perfectly fills the free spaces in the sprayed surface, which provides excellent thermal and acoustic insulation. It is very easy to apply with the use of specialist spray units. It is environmentally friendly and CFC-free; it is foamed with carbon dioxide formed in the reaction of component A with B.
Properties:
- easy to process
- does not contain CFCs
- no foam odour
- high growth rate
- high yield
- very good dimensional stability
BINDERS FOR THE MAT AND SYNTHETIC GRASS
Two component PUR thixotropic solvent free binder
Properties:
- high mechanical resistance
- good elasticity
- long pot life
- does not contain solvents
- wide range of adherence
Application:
TETRAPUR 100 is used as a two-component thixotropic binder for fixing the
elastic mats made of EPDM or SBR granules installed mechanically „in situ”, as
well as for PUR foam mats reinforced with fabrics. In order to obtain the best results
it is advised to use TETRAPUR 100 at the temperature range from 6°C to 30°C.
| Technical data: | ||
|---|---|---|
| Density (at 23°C) | Comp. A Comp. B Mix A+ B | ~1,41 g/cm³ ~1,43 g/cm³ ~1,23 g/cm³ |
| Viscosity (at 23°C) | Comp. A Comp. B Mix A + B | thixotropic thixotropic 200 ± 100 mPas |
| Pack size | Comp. A Comp. B | 12,6 kg 1,8 kg |
Two component coloured bonding PUR thixotropic solvent free binder.
Properties:
- long pot life
- do not contain solvents
- for applications in good weather conditions
Application:
TETRAPUR 100T is used as a two-component thixotropic binder for fixing the
sheets of synthetic artificial grass in good weather conditions. In order to obtain the
best results it is advised to use TETRAPUR 100T at the temperature range from 7°C
to 30°C.
| WŁAŚCIOWŚCI | ||
|---|---|---|
| Density (at 23°C) | Comp. A Comp. B Mix A + B | ~1,43 g/cm³ ~1,06 g/cm³ ~1,41 g/cm³ |
| Viscosity (at 23°C) | Comp. A Comp. B Mix A + B | thixotropic 200 ± 100 mPas thixotropic |
| Pack size | Comp. A Comp. B | 12,6 kg 1,8 kg |
Two component coloured bonding PUR thixotropic solvent free “heavy duty” binder
Properties:
- long pot life
- do not contain solvents
- for applications in humid weather conditions
- wide range of materials adhesion
Application:
TETRAPUR 100T is used as a two-component thixotropic binder for fixing the
sheets of synthetic artificial grass in humid weather conditions. In order to obtain
the best results it is advised to use TETRAPUR 100TS at the temperature range
from 2°C to 30°C.
| Technical data: | ||
|---|---|---|
| Density (at 23°C) | Comp. A Comp. B Mix A + B | ~1,43 g/cm³ ~1,06 g/cm³ ~1,41 g/cm³ |
| Viscosity (at 23°C) | Comp. A Comp. B Mix A + B | thixotropic 200 ± 100 mPas thixotropic |
| Pack size | Comp. A Comp. B | 12,6 kg 1,8 kg |
POLYURETHANE BINDERS FOR ELEMENTS FORMED IN HOT
[table “16” not found /]
[table “15” not found /]
SYSTEM FOR COLORING GRANULATES
BINDERS FOR THE SANDWICH PANEL
BINDERS FOR THE TIMBER
MINERAL AGGREGATE BINDERS
Click here to change this text
SYSTEM FOR MINING
Click here to change this text